paw .09 manual

mitchg95 Tue Aug 07, 2012 12:40 am

i cant find any information on the internet on Paw engines, i want to run soon but i have never ran a diesel before so i need some help so i do not &*$% things up
thanks

Surfer_kris Tue Aug 07, 2012 2:41 am

They run just like any of the other oldschool diesels. They need around 25% all castor, about 35% ether, 1.5% DII (or similar) and the rest is kerosene. A 8x4-9x4 prop is about right (depending on if it is MkI or MkII) and will give you around 10500rpm. Prime, handflip and increase compression slowly if it doesn't fire. The engines are run at the factory and the compression has been set there, but you need a little higher to get it started (when cold) and then turn it back out once running. Hot starts on the other hand are made with a little lower compression than the running one.

I can look for a manual later tonight, but there is not much to it.

paw .09 manual Bz77889