Re: Micro Ringmaster Plans

getback Tue Apr 12, 2016 5:41 pm

Hey Roger I would bee in for one of the stunt version kits if not too much trouble , I am set for the TE with the Zero but just in case , I am thinking of flying it some time What?

Thanks , Eric 's in no hurry ! Flying

duke.johnson Tue Apr 12, 2016 6:18 pm

You are awesome Roger. I guess I should get one of each, unless you have more demand than kits. I have several RM's built and ready to fly and I paint them all in the same paint scheme and color. Let me know how much, shipped to 98579 and how you want paid. I'll build these with the bipe you cut me, all at the same time. I like to fly the RM. flyathon every year. I have the beginner, baby, junior, and S-1 built now. With the addition of the micros, it's time to start collecting the bipes of the same size. It's cool when they are all lined up.

**RknRusty** Tue Apr 12, 2016 6:51 pm

Roger, I don't want you to feel like you're getting piled on, but if you could cut me a micro stunt kit, I'll buy one from you. I'll be needing it for the Traveling Engine.
Thanks,
Rusty

pkrankow Tue Apr 12, 2016 7:09 pm

I'll take a micro stunt too. Same reason, traveling engine.

Phil

**Cribbs74** Tue Apr 12, 2016 7:40 pm

Want to shrink a Shark .15?

Half kidding, it's my build for the Travelling .010

rogermharris Tue Apr 12, 2016 8:12 pm

Sounds like I need to try and cut a bunch of stunt wing micros!

I wil try and start with 6 stunt kits and see where it goes material and demand wise.

Ron, let me get the first run out of the way and I will see what I can do. Do you have plans for the shark?

Duke... I'm pretty sure I have seen a couple micro bi plane plans but may have been .020 based

rogermharris Wed Apr 13, 2016 8:37 am

HEY GUYS!

sorry for yelling LOL!

i did not have the micro stunt ringmaster layed out for cutting and now i remember why.
does anyone have a scale drawing of the .010 tee dee engine?? i want to verify the profile for the fuselage. i can cut everything but the fuse.

micro ringmaster - Micro Ringmaster Plans - Page 2 Micro_10

micro ringmaster - Micro Ringmaster Plans - Page 2 Micro_10

**Cribbs74** Wed Apr 13, 2016 8:55 am

Roger, check out the instruction sheets section of the forum. The link is on the left of the page. The instructions contain the drawings you are looking for.

Ron

Or click here:

https://www.coxengineforum.com/h24-instruction-sheets

rogermharris Wed Apr 13, 2016 9:15 am

Cribbs74 wrote:Roger, check out the instruction sheets section of the forum. The link is on the left of the page. The instructions contain the drawings you are looking for.

Ron

Or click here:

https://www.coxengineforum.com/h24-instruction-sheets

Perfect!! thanks ron!

rogermharris Wed Apr 13, 2016 1:17 pm

Progress! i'm thinking $14 shipped on the slab wing micro and $16 shipped on the stunt wing.
i have four slab wing kits cut and will have 6 stunt wing kits hopefully by tomorrow.
then i will see about printing plans and packaging.....

micro ringmaster - Micro Ringmaster Plans - Page 2 Img_4813

micro ringmaster - Micro Ringmaster Plans - Page 2 Img_4813

JPvelo Wed Apr 13, 2016 1:34 pm

What's the wing area on these things?

rogermharris Wed Apr 13, 2016 1:58 pm

JPvelo wrote:What's the wing area on these things?

the slab wing is 23.8 sq-in and a 10.5" wingspan
the stunt wing is 53.5 sq-in with a 17.5" wingspan

**RknRusty** Wed Apr 13, 2016 3:41 pm

Wow, the stunt has a pretty good sized wing on it. That's cool, maybe I can put a Big Mig on it later lol!

akjgardner Wed Apr 13, 2016 3:50 pm

RknRusty wrote:Wow, the stunt has a pretty good sized wing on it. That's cool, maybe I can put a Big Mig on it later

Wow, a big mig would whip that thing around suppersonic ha ha.

**RknRusty** Wed Apr 13, 2016 8:35 pm

I better cover the wing with SuperKote!

getback Thu Apr 14, 2016 9:12 am

Looking good Roger , That is a pretty long wing , I have got to get building darn life stuff keeps getting in the way and engines to clean take up a fare amount too , and now there's a fire pit in my field with a picnic table for a camp out or some kind of get together for some FUN after that it has got to GOOOO !! getback Airplane

rogermharris Thu Apr 14, 2016 9:59 pm

getback wrote:Looking good Roger , That is a pretty long wing , I have got to get building darn life stuff keeps getting in the way and engines to clean take up a fare amount too , and now there's a fire pit in my field with a picnic table for a camp out or some kind of get together for some FUN after that it has got to GOOOO !! getback

Dude I know all about it. Hope things are getting better on your end. I have still not finished the scout and everything I broke last time we were out the end of July last year. Just gotta make time! I think you could shorten the stunt wing but it was cut from an existing plan. I have 6 stunt wing kits cut along with 4 plank wing kits. Please pm me if you are wanting a kit. I will do my best to get them packed up and ready to ship early next week.

Sounds like I need to buy myself a tent Eric....

duke.johnson Thu Apr 14, 2016 10:36 pm

I would love one of each. If that's not to greedy. Pm coming.

rogermharris Fri Apr 15, 2016 6:41 am

duke.johnson wrote:I would love one of each. If that's not to greedy. Pm coming.

pm answered!

i have 5 micro stunts ($16 shipped) and 3 micro ringmaster slab wing ($14 shipped) left out of the first run. those who wanted one please PM me

rogermharris Fri Apr 15, 2016 8:56 am

3 of each left one the first run

rogermharris Sat Apr 16, 2016 5:44 pm

Well it looks like the first six stunt wings are sold. I still have three plank wing micros.

I hope to cut a few more kits once my balsa order arrives. If anyone else is interested please let me know so I know how many kits to cut.

1/2A Nut Sat Apr 16, 2016 6:29 pm

Any vid of these flying???

**Cribbs74** Sat Apr 16, 2016 11:26 pm

1/2A Nut wrote:Any vid of these flying???

They are probably out there. I have done a vid of a foam ring with a .010. The CL stuff doesn't go at near the speed as your ships do.

Ron

1/2A Nut Sun Apr 17, 2016 12:15 am

Greenie for Ron, I have seen this vid rare posting for micro CL. Small Cox Logo

Your engine was doing 23,400 to 24,800 as and average, I imagine you had it rich to
keep a relaxed flight style, proportioned to size, well done!

Did you use the stock tank or tin tank to the side or bladder?
What was your line length?
Some ultra light 1Lb .001 line should work well for wing overs and loops.

MODEL # NF1501-22
http://www.berkley-fishing.com/berkley-line-uni-filament-berkley-nanofil/berkley-nanofil/1285551.html

**Cribbs74** Sun Apr 17, 2016 1:10 am

Line length was around 15-17' with a 1/6 oz perfect tank I think. RPM was way down I agree. That little plane was sitting up for a good year before I fueled and fired. It was running poorly. It was good enough, I only slung it around to raise interest in the TE.

Thanks for the greenie. And thank you for commenting on my little attempt. Means a lot coming from a guy that can bring serious performance from these tiny engines.

Ron

Sponsored content