Re: March Engine of the month submissions, post them here!

engine049 Tue Mar 06, 2012 5:54 am

nitroairplane wrote:Again?
lol

Again who?

nitroairplane Tue Mar 06, 2012 6:00 am

engine049 wrote:
nitroairplane wrote:Again?
lol
Again who?

https://i.servimg.com/u/f41/17/21/31/68/b10.jpg that's the engine that won last time!

**Cribbs74** Tue Mar 06, 2012 7:19 am

John Goddard wrote:All the other members that drink 15 pints of Guinness, whilst hanging upsidedown listening to Judas Preist played backwards
will no doubt already be aware of the following but just in case ,-

In 1945 Leroy Cox was approached by the US Government to set up a secret laboratory researching new technology.
He had the idea to create a toy making concern to hide what he was really up to.
Fortunately for us his 'sideline' was fairly successful too.
Without going in to too much detail (obviously this is all still classified) I'll tell you about one (or two) ideas he came up with.
Those of you who enjoy puzzles and languages will of course have long realized that Leroy M Cox Maunfacturing Co Inc when
translated into Serbo Croat then Chinese forms an anagram of 'I'm Dr Emmet Brown I'll be back from the future sometime'.
Also have non of you marvelled at the fact LMC dissappeared (sorry 'died') just 6 months after the first F117 Stealth flight?
Whilst working on stealth he constructed several models of the proposed craft and obviously he needed an engine to
power the thing. Enter the Cox FluxBeeCapteeacitordee/kingsnuclothespecial.
Early in development they could be seen by 'brighter' people but not by the masses.

The good news is twofold,-
1, LMC is going to return, a bit like the second coming only with more new model engines.
and
2, I can't fail to win this months EoTM.....

If there are any sceptics remaing among you check out the irrefutable proof below....

Obviously only those with high levels of intelligence might see the thing!

I see it! Right there! plain as day, behind the white sheet of card stock.

John Boy your a nut bar......... lol!

engine049 Tue Mar 06, 2012 9:26 am

Different engine and this is the engines left side Laughing

plus, What's more luxurious than Honduras Mahogany?

nitroairplane Tue Mar 06, 2012 9:31 am

engine049 wrote:Different engine and this is the engines left side plus, What's more luxurious than Honduras Mahogany?

I know lol must be interesting to turn it over.
Indra

**Cribbs74** Tue Mar 06, 2012 9:40 am

The cutaway is done different on Tom's. Last months was half an engine this one has been milled by the looks of it.

**RknRusty** Tue Mar 06, 2012 9:43 am

microflitedude wrote:How long will the entry run?

Until we get 10 submissions.

nitroairplane Tue Mar 06, 2012 9:43 am

I know but one could still call them "similar".

engine049 Tue Mar 06, 2012 9:46 am

cribbs74 wrote:The cutaway is done different on Tom's. Last months was half an engine this one has been milled by the looks of it.

I actually used a abrasive cut off wheel in a dremel and a barrel sander to smoothen everything rounden. I can actually engage the spring starter and itll spin and spin and spin and spin. I greased it with graphite and Prolong super lubricant

Jason_WI Tue Mar 06, 2012 8:42 pm

Here is my P40 engine:

March Engine of the month submissions, post them here! - Page 2 Cox_p410

**RknRusty** Tue Mar 06, 2012 9:36 pm

nitroairplane wrote:I know but one could still call them "similar".

It's a cox engine, it counts. I count 6 so far.

Mark Boesen Tue Mar 06, 2012 9:59 pm

**Cribbs74** Tue Mar 06, 2012 10:02 pm

Mark Boesen wrote:

Ooooo! Mark that is handsome. Like the logo too.

Mark Boesen Tue Mar 06, 2012 10:07 pm

thanks!

Kim Wed Mar 07, 2012 5:31 am

engine049 wrote:
cribbs74 wrote:The cutaway is done different on Tom's. Last months was half an engine this one has been milled by the looks of it.

I actually used a abrasive cut off wheel in a dremel and a barrel sander to smoothen everything rounden. I can actually engage the spring starter and itll spin and spin and spin and spin. I greased it with graphite and Prolong super lubricant

I may have to try to duplicate that! It'd make it a lot easier for me to explain the function of these things than my pencil doodles and hand motions !

Tee Bee Wed Mar 07, 2012 6:27 am

Ok. I'll play.

March Engine of the month submissions, post them here! - Page 2 Scalpe14

nitroairplane Wed Mar 07, 2012 6:32 am

Tee Bee wrote:Ok. I'll play.

Oh that looks good!

John Goddard Wed Mar 07, 2012 6:39 am

But what am it?

nitroairplane Wed Mar 07, 2012 6:43 am

John Goddard wrote:But what am it?

Tim Wiltse mangusta DR?

Tee Bee Wed Mar 07, 2012 7:09 am

Yep. Tim Wiltse-built Mangusta DR .049. Rear rotary induction. Turbo plug head. Lots of neat machine work. After 3.5 years as a hangar queen, it's finally fulfilling it's duty as an aircraft engine.
March Engine of the month submissions, post them here! - Page 2 Img_2910

March Engine of the month submissions, post them here! - Page 2 Img_2910

About 3 minutes into the vid, she starts leaning out for a real nice run.

https://www.youtube.com/watch?v=Sbq4MVq0Fo8&feature=plcp&context=C307e6dbUDOEgsToPDskI_6k6Ztj6oOlDYS3S5oxAo

John Goddard Wed Mar 07, 2012 8:06 am

Sorry TB I should asked what it was? followed by it looks the nuts
J
Very Happy

Cz10 Wed Mar 07, 2012 9:37 am

Reminds me of the Ace Simple 400 with a TD .049 I had back in the late 70's. Come to think of it, there is a box around somewhere with the gear from that era in my life. I bet the TD is in there... I'll have to hunt it down.

**RknRusty** Wed Mar 07, 2012 10:43 am

That's 8. The next two will wrap it up.

Cz10 Thu Mar 08, 2012 4:23 pm

This just arrived in the mail.

March Engine of the month submissions, post them here! - Page 2 IMAGE_0364CF8B-CDF8-436D-8704-30E4A5D8735D

I particularly like the label on the box it came in!

March Engine of the month submissions, post them here! - Page 2 IMAGE_AFD77456-D8D2-45FE-B70C-5BFCD93EFC48

March Engine of the month submissions, post them here! - Page 2 IMAGE_AFD77456-D8D2-45FE-B70C-5BFCD93EFC48

**RknRusty** Thu Mar 08, 2012 6:06 pm

Cz10 wrote:This just arrived in the mail.

[img]

I particularly like the label on the box it came in!

[img]

Daaaaamn, Cz, I want one. I bet Whoopass is right!

That's 9.

Sponsored content