New Flight: Pitts -Skelton Aerobatic model (page 9)

balogh wrote:Does the upper wing really have an inverse dihedral?

oh no no, I'm just playing and imagining this model! ... the upper wing goes without a dihedral, the lower wing has a positive dihedral

by way of comparison between the Bi-Hawk and the Pitts ....
.... I look at them and I look at them and I think: "I just hope this thing flies" haha



Note, the lower wing has no dihedral yet.

Okay, so I start locating the micro servos on the bottom wing.



By means of a teger needle and a round file, I generate the hole through which the power cables pass.

Centered upper flange aligned and glued central fiber rib.
The upper wing does not have a dihedral, it is totally straight.

balogh wrote:Beautiful, Mauricio. If you glue the wing halves together, with the servos and their cables mounted permanently, how will you replace the occasionally defective servos in future?

Or, are the wing halves having the aileron servos not glued together for future servo replacement?

Or if you glue them together, do you leave a cable channel open and accessible for pulling the cables and connectors out through the channel for replacement?

thank you dear friend!
The micro servos can be removed, since I will make some holes as I show in the photo now, the previous photo is just for the purpose of seeing how the channel was made.
That hole or channel could have been made before plating with a raft, only I had not defined if I would place a single central servo for the four micro servos or as I decided to do then, that is, one micro servo every two ailerons.
in turn each micro servo will be covered with an acetate sheet (.05 mm plastic) with two screws, the micro servos are housed there with pressure, (they will not be glued), they will be kept in place thanks to the acetate cover that I will put there .... that's the idea.

balogh wrote:

MauricioB wrote:Centered upper flange aligned and glued central fiber rib.
The upper wing does not have a dihedral, it is totally straight.

I see the center struts are fixed in a trapezoid form to the fuselage. But, apart from the center rib to which the strut tops are bolted, will the top wing have any other support? Like additional struts between the tips of top and bottom wings, to keep them parallel?

Yes the model wears the upright. (MONTANTES)
In this case they are not only aesthetic but they are also part of the fundamental structure of the wing's stability and reinforcement.
The U / C cable channel will not be logically placed.


then:

central wing reinforcement with fiberglass:



spoilers, already functional:



Micro Serving Tray:

Mauricio, I have no words.
Your work is stunning. I guess I do
have words. Beautiful work brother.
Bob

Thanks friend, your very valuable and encouraging words!

Centered and screwed lower wing ...











Placing linkage on the lower wing ... everything seems to be fine:



Centering is perfect:

Very Good job my friend I think it WILL Fly i got behind a page lol

Hello mauricio
Every thing you make is well thought and engineered, great job!

It's always good to have a Little Stinker. This was my first one!
You sure are building a nice model.
Chris...

getback wrote:Very Good job my friend I think it WILL Fly  i got behind a page lol  

genius!

F4D Phantom II wrote:Hello mauricio
                       Every thing you make is well thought and engineered, great job!

very kind for your words, thanks for appreciating this work, I am very happy with this project ... I enjoy every step friend!

stuntflyr wrote:

It's always good to have a Little Stinker. This was my first one!
You sure are building a nice model.
Chris...

Thanks for leaving me your message! ...
Now enter into doubts, .... yes, in doubts, I really like the decoration of COX .... I saw this video and it really fascinates me ..

No doubt that both are iconic schemes, Mauricio. Little Stinker with the checkers on the bottom always makes me jump at it. Art's S-1 was short lived and he got an S-2A soon after Skip Volk's death in his own S-1, but that red, white and blue scheme is recognizable on the Chipmunk and Pitts immediately!
You have a hard decision but either will be great.
Chris...

I have put together all the photos in this video as part 1.
I hope you enjoy it.
Thank you all for being there:

hello friends ... well I have decided !, and I have started to cover ....

Oh boy, it comes to life with color!

Enjoyed the slide show ! the Pitts is coming right along and looking Good !!