What Cox product would you like to see reproduced?

"Just a pleasant trip down memory lane on my part." - Kim

Problem is doing so means traveling in reverse rather than forward where the future lies.

Scary, no?

"Skunk Works Backplates",,,ohh,, they would sell. With a catchy jingly name thought up by yours truly, it's like money in the hidey hole.

If we are dreaming, I would take a few Cox conquest with ABC construction...

I'd like to see a basic PT-19 'ARF' kit, buyer would clip part from plastic tree and install there own engine, sold in plan cardboard box factory direct.

also a RR-1 would be neat!

Money talks and nobody walks.

A Ju87D Stuka, P51-D mustang, and a P-40 Warhawk, all with a Tee Dee .049 option. And like someone else said, a PT-19 that could be assembled by the buyer... with a Bee as well as a mounting tankless bracket. MMMMWaaahahahaha, guess what I would power mine with. Better use extra rubber bands to hold the wings on.

And the old green Cox control handles. My only one broke in mid flight. They are the best.

I would like to see a Baby bee but .010 size. Yes folks something cox should have come up with.... a PeePeewee .010 Rear reed valve induction moto! Would have been awesome

dankar04 wrote:Money talks and nobody walks.

Be careful what you wish for. Bernie is listening.

I too would like the original Cox handles. My friend has one and they are neat. I only have two types of handles. Sig and Carl Goldberg. I prefer the CG Handles. Much nicer feel.

engine049 wrote:I would like to see a Baby bee but .010 size. Yes folks something cox should have come up with.... a PeePeewee .010 Rear reed valve induction moto! Would have been awesome

They prototypes it but it barely ran if at all.
I have been trying to track down the cox prototypes.
Mudhen has a few parts.
Indra

engine049 wrote:I would like to see a Baby bee but .010 size. Yes folks something cox should have come up with.... a PeePeewee .010 Rear reed valve induction moto! Would have been awesome

That was originally the idea, but it just wouldn't run. I think they decided the reed was too small and tended to float, so they had to go to a rotary valve.

Expand the TD 0.010 parts available, if there is a market for
the existing parts then presumably there would be the same market
for an expanded range. I know, I know, there is probably a very
small market for the 0.010 parts.
John

yeah even .010 glow head move slowly.

nitroairplane wrote:

engine049 wrote:I would like to see a Baby bee but .010 size. Yes folks something cox should have come up with.... a PeePeewee .010 Rear reed valve induction moto! Would have been awesome

They prototypes it but it barely ran if at all.
I have been trying to track down the cox prototypes.
Mudhen has a few parts.
Indra

Yeah I have the original cox blueprints.

PeeWee backplates, even if they were plastic.

If we are dreaming still, I want an .020 Black Widow!

engine049 wrote:

nitroairplane wrote:

engine049 wrote:I would like to see a Baby bee but .010 size. Yes folks something cox should have come up with.... a PeePeewee .010 Rear reed valve induction moto! Would have been awesome

They prototypes it but it barely ran if at all.
I have been trying to track down the cox prototypes.
Mudhen has a few parts.
Indra

Yeah I have the original cox blueprints.

Pictures? Those would be something to see!

microflitedude wrote:

engine049 wrote:

nitroairplane wrote:

engine049 wrote:I would like to see a Baby bee but .010 size. Yes folks something cox should have come up with.... a PeePeewee .010 Rear reed valve induction moto! Would have been awesome

They prototypes it but it barely ran if at all.
I have been trying to track down the cox prototypes.
Mudhen has a few parts.
Indra

Yeah I have the original cox blueprints.

Pictures? Those would be something to see!

Ive gotta find my super secret cd then I will post it

I call upon the power of Matt G. Matt you went through that cd post it.

Thimble Drome Water Wizard and the .15 engines.

nitroairplane wrote:yeah even .010 glow head move slowly.

Snagged a new one on ebay last night, hope I was not bidding against you. john

The black rubber ducky 7x3.5 props for the .09 engine.

Tell that to my fingers when I'm trying to adjust the fuel mixture on MY TEE DEE monunted on the 30 year old plastic tank which when she's running rough looks like the mounts are going to snap off at any time and I can't do anything about it because I hold on to the needle to adjust it! give me the same tank in Alum or metal for the TEE DEE's and save my fingers from getting whacked!

or bring back the TD.09 with throttle control, was going to say with muffler, but why else would you be flying Nitro, TO HEAR THEM SCREEM, specially that TEE DEE !!

It's like buying a Harley that you can't hear? when that plane goes by me I wan't to hear it screeming a high pitched tune just like the real babies did! oops sorry lost it for a sec there, oh yah, a TEE DEE .09 or I'd settle for any TEE DEE

Jobe_Pro wrote: Tell that to my fingers when I'm trying to adjust the fuel mixture on MY TEE DEE monunted on the 30 year old plastic tank which when she's running rough looks like the mounts are going to snap off at any time and I can't do anything about it because I hold on to the needle to adjust it! give me the same tank in Alum or metal for the TEE DEE's and save my fingers from getting whacked!

or bring back the TD.09 with throttle control, was going to say with muffler, but why else would you be flying Nitro, TO HEAR THEM SCREEM, specially that TEE DEE !!

It's like buying a Harley that you can't hear? when that plane goes by me I wan't to hear it screeming a high pitched tune just like the real babies did! oops sorry lost it for a sec there, oh yah, a TEE DEE .09 or I'd settle for any TEE DEE

Tatone made aluminum tank mounts for the TD. They usually get a good price.

http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&_trksid=p4340.l2557&hash=item2319d7a43d&item=150757418045&nma=true&pt=Radio_Control_Parts_Accessories&rt=nc&si=%252FNFbcLDkoIUj60PC4fUjv4d36xI%253D&orig_cvip=true&rt=nc

Jason