Recicled plastic (corflute=coroplast) biplane homemade (babe bee powered)

jmcalata Sun Mar 15, 2015 7:10 pm

Hello

comunity

Finally

, I adjust center of gravity and correct wings incidences.

Now it´s fun and excite flight. Airplane

Best regards
JMCalata sunny

chevyiron420 Sun Mar 15, 2015 8:52 pm

I built one of those as per xjet on youtube. I set mine up for control line. He would not give measurments and other inportant info. He showed the model being built with hot glue, and then never finished the third build video. I took mine to the field and started it, got a needle on it. At that point the hot glue let go and the engine, mount and all flew out and struck my son.
Even on some other coroplast builds I havent seen good instructions on glueing yet. I have some material and would like to do some building, but not untill I knjow how to properly glue it.
Phil

Marleysky Sun Mar 15, 2015 11:26 pm

Never trust any thing you see on YouTube....especially if there is no part 3 of a 3 part video blog......

If you want to learn everything you want to know about Simple Plastic Airplane Designs, please visit these sites:

http://www.spadtothebone.net/ And http://spadworld.net/

Build safe, fly safe. RC Plane

1/2A Nut Sun Mar 15, 2015 11:33 pm

Vooombah Vooombah Yow yow yip yip!

rsv1cox Mon Mar 16, 2015 9:08 am

Nice flight, fast, always in control. John Philip Sousa would be proud.

getback Mon Mar 16, 2015 10:15 am

Nice , man that thing really humms , Didn't think to much till you got it tuned in then Flying

Good Day !!

jmcalata Mon Mar 16, 2015 11:01 am

Thanks for reply Smile

Yes, the hot glue it´s not secure for engine stand Rolling Eyes

, it´s necessary fit add a hard wood table with some screws for example, but for the rest of airplane is good glue.

In the first flights the airplane it´s not tuned, incedence was zero degrees, only in the last fligth all are ok. Wink

Philip sousa march is good march for the design victory. Beer Cheers

dirk gently Tue Mar 17, 2015 11:25 am

That's a beautiful flying spot you have there. Is that in Spain?

batjac Tue Mar 17, 2015 12:43 pm

Of course, you realize that since you didn't do a build thread, you are duty-bound to post your working drawings....

The Stickler Mark

p.s. Great Job! cheers

jmcalata Tue Mar 17, 2015 5:07 pm

Yes Polansky friend ... I live in the sunny sunny

Spain.

I think this post must be in model and modeling, maybe the Admin or moderator can move it.

Video 1/3

Video 2/3

...

Now the model is finished and I´ve no time to write a new build thread moreover I dont draw plans, the size is explain in youtube videos, however I can reply for any question.

Regards
JMCalata

Sponsored content

Recicled plastic (corflute=coroplast) biplane homemade (babe bee powered)

Recicled plastic (corflute=coroplast) biplane homemade (babe bee powered)

Re: Recicled plastic (corflute=coroplast) biplane homemade (babe bee powered)

Re: Recicled plastic (corflute=coroplast) biplane homemade (babe bee powered)

Re: Recicled plastic (corflute=coroplast) biplane homemade (babe bee powered)

Re: Recicled plastic (corflute=coroplast) biplane homemade (babe bee powered)

Re: Recicled plastic (corflute=coroplast) biplane homemade (babe bee powered)

Re: Recicled plastic (corflute=coroplast) biplane homemade (babe bee powered)

Re: Recicled plastic (corflute=coroplast) biplane homemade (babe bee powered)

Re: Recicled plastic (corflute=coroplast) biplane homemade (babe bee powered)

Re: Recicled plastic (corflute=coroplast) biplane homemade (babe bee powered)

Re: Recicled plastic (corflute=coroplast) biplane homemade (babe bee powered)