Re: Tach Race 2015 Final Wrap-Up

Kim Fri Jan 30, 2015 8:57 am

GWILLIEFOX wrote:What engine did Mark use in Unlimited? I seem to have missed the info on it.

And Kim, super job. It is a pain in the rear end to set up one engine the first time, let alone all the ones you've done and will do. Glad there are still doers like you to help us enjoy out marvelous hobby!

tach race 2015 - Tach Race 2015 Final Wrap-Up - Page 11 1_121

tach race 2015 - Tach Race 2015 Final Wrap-Up - Page 11 2_113

TDbandit Fri Jan 30, 2015 9:45 am

Superb job everyone, to be honest, I didn't expect to see those numbers including from mine, this was defenatly a learning experience for me!

Cudos to Kim for hosting this and putting up with all the aggravation with the setup and crankiness as well as all the figuring, sorting, pics, video's (if any) and shipping. Something like this would probably drive me up the wall if I had to do it! Kim, "You're Tha Man!!" Clapping

(Bandit)

getback Fri Jan 30, 2015 10:40 am

Well over all I think I didn't do too bad being my first time in the TACH RACE A 5th , 3rd ,2nd ,and another 3rd. Although a couple of those classes had small attendance . But with MARK whipping up on us , going to have to put some work in to try and up the anny for next time round Cool

That was a lot of fun and I bet KIM smells like NITRO !! ( and that ant bad ) lol!

Good Job Everyone Thumbs Up

stuntflyr Sun Feb 01, 2015 3:28 am

Spectacular results, never seen a Tee Dee go 25.5 with a two blader.
Chris...

Kim Sun Feb 01, 2015 6:57 am

stuntflyr wrote:Spectacular results, never seen a Tee Dee go 25.5 with a two blader.
Chris...

Yeah, I realized early-on with the Mouse engines that the numbers, while expected to be higher, WERE pretty far up there. But changing the tach battery and checking it against the shop lights ('bout my only options) showed the same numbers, and the runs DID seem fairly grouped.

I know the odds are against my getting some world record numbers in my little shop, but Eric and Matt's Tee Dee's boh hovered around their top rpms with very little surging, so I was left to record what I saw.

tach race 2015 - Tach Race 2015 Final Wrap-Up - Page 11 1_213

tach race 2015 - Tach Race 2015 Final Wrap-Up - Page 11 1_213

Ken Cook Sun Feb 01, 2015 7:22 am

I've seen those numbers on the non safety tip Cox 5x3 on good runners. I've seen a solid 26 but backed off. I've had some break the crank right at the cutout. When I had failures it was always flying and not on the bench. I'm sure the rpm's go even higher. I just had a few out myself this past weekend. I really do enjoy watching the TD run. Ken

Mark Boesen Sun Feb 01, 2015 11:21 pm

Kim,
Thanks again for all your hard work.
So now i gotta wonder if we've reach, or come pretty close to the ceiling for RPM for these engines, the top Mouses/unlimiteds pulled pretty close to the Tee Dees!

Kim Mon Feb 02, 2015 9:00 am

Hey,

You guys are welcome, and thanks to all the participants.

Some of the engines are are starting home today. I'll be sending them as I get the prizes sorted, and will type up a final report.

Today, Wayne's and Augustin's engines are heading out...please let me know as soon as you get them so I can know they got home OK.

GWILLIEFOX Mon Feb 02, 2015 12:51 pm

Hey Daryll,

I was just talking to David Z and he was telling me about you having engines in the Tach Race. I saw your name, but didn't realize who you were. This forum is great! Lots of fun things to do. See you next fall or sooner. If you are up at Lebanon, stop by; I'm in the west hall, table C35-36.

Bill Mohrbacher AKA GWILLIEFOX AKA Dr. Bacher

P-40 Warhawk Mon Feb 02, 2015 5:52 pm

Hi Bill,now I make the connection,nice to see you here.I will definitely be seeming you up at Lebanon in March,Daryll

Kim Tue Feb 03, 2015 12:11 pm

OK...the next batch is headed out:

Rod, David, Daryll, Rusty, and Bob's engines are on their way home. Please let me know as soon as they arrive.

**RknRusty** Tue Feb 03, 2015 1:01 pm

Kim wrote:OK...the next batch is headed out:

Rod, David, Daryll, Rusty, and Bob's engines are on their way home. Please let me know as soon as they arrive.

Will do. Thanks, Kim.
Rusty

TDbandit Tue Feb 03, 2015 10:37 pm

Kim wrote:OK...the next batch is headed out:

Rod, David, Daryll, Rusty, and Bob's engines are on their way home. Please let me know as soon as they arrive.

Roger that! I'll let ya know when it gets to my door Smile

(Bandit)

Oldenginerod Tue Feb 03, 2015 11:38 pm

Two go out, three come back. Thanks Kim. PM me with the return postage cost & I'll sort it out. Will probably take about 10 days for them to get here. I'll let you know as soon as they arrive Down Under.

Rod.

**RknRusty** Thu Feb 05, 2015 10:35 am

Mine is home, Thanks.
I trust you received my postage payment in the mail. let me know if not.
Rusty

dckrsn Thu Feb 05, 2015 4:10 pm

My BabeBee made it home today Kim, and
a little package is on it's way back to you.
Thanks again brother.
Bob

cryo-one Thu Feb 05, 2015 4:26 pm

Hi Kim,

Engines are safely home ! Thanks to You & your crew for all the effort.

Regards Wayne

P-40 Warhawk Thu Feb 05, 2015 5:39 pm

Thanks Kim,I received the engines in the mail today,and I also really appreciate the time and effort that you and your crew put into running the Tach Race.Thanks again,Daryll

TDbandit Thu Feb 05, 2015 5:56 pm

My engine just arrived back at home base thank you Kim for your effort and time You're tha man dude! I plan on entering again next year! Let me know if there's anything ya need Smile

(Bandit)

Kim Thu Feb 05, 2015 7:14 pm

Thanks guys, I appreciate it.

I got Paul's, Mark's, and Eric's on the way today.

getback Fri Feb 06, 2015 8:12 am

Thanks Kim , will let U know when they get here . If I owe you more money let me know please . Eric

Ken Cook Fri Feb 06, 2015 6:46 pm

On page 82 of the February issue of Model Aviation in the Old Timers section there's mention of the tach race .

**RknRusty** Fri Feb 06, 2015 7:12 pm

Ken Cook wrote: On page 82 of the February issue of Model Aviation in the Old Timers section there's mention of the tach race on pg. 82.

That's great, we got some publicity. We did last year too.
Rusty

Mark Boesen Fri Feb 06, 2015 7:50 pm

Ken, could you scan it or shoot a photo of it?

Ken Cook Sat Feb 07, 2015 6:34 am

Sponsored content