Combat planes FS for shipping cost

I don't fly them in combat but iI do fly combat planes.....The are great for stunt when you slooowwwww them down a bit. I would be interested!

Wow, Didn't expect such interest.  There will be a bit of a delay shipping because I will be out of town for a few days, sorry.  I'll pass them out first come first served.

Most have sewn hinges which I would restitch.

And first is Kim:  the one pictured in my first post is a 15 and YOURS!  PM your address, and I'll get it.

Here is the only other 15.  The inboard wing is UNcovered.
Number 2


All the others are all 29/35 based on the engines he had:

Three


Four. It has two sets of mounting holes.


Five and Six. Note the leading edge is cut out on the outboard wing. No idea what that is for.


Seven



Ron/Cribbs, you are next.  Post your choice so everybody knows what is gone, and PM your address.

Allen/Aero, you are after Ron.  Post your choice, and PM me.

I'm glad they are getting good homes.

What is shipping on a 29/35 bird?

The LE is cutout so the engine can sit back enough to balance. There should be a piece of pop can glued in as a heat shield.

Phil

I am in for the one with the red checkers on the stab.

I shot you a PM.

Phil, expect $20 or so on shipping. If the booms are cut off.

Cribbs74 wrote:I am in for the one with the red checkers on the stab.

I shot you a PM.

Phil, expect $20 or so on shipping. If the booms are cut off.

Is that 6 or 7 that you want?

Cut the booms? As in take a saw to the fuselage???? Is that really what you want???

John
It looks like there are two planes with the red checks.
If that is so, send me the other one.    
If not, send me the one red and white barred tail.
You should be able to pad those real well in a big box and send them USPS Standard or Parcel Post.

And mark them FRAGILE!


PM on the way.

No cutting please.  
$20 is fine, how would you like it?
6 or 7 is also fine. I think I like 7 better.

Phil

Seven,

And yes the tail booms cut doesn't affect the wing.

Edit: Six is fine too. I don't want to step on Phil's toes.

Bag the plane. Tape plane through bag to a over large sheet of cardboard. Fold cardboard over on itself. Insert into box. It should be more than secure.

I will pay an extra $5 or so for no cutting.

Phil

The 35s have wingspan of 40" length of 20" so a box 44x22x3.  They will be shipped from 77006.  For an example, I ran a check to Columbus, Ohio.  UPS ground came in lowest at 18.71 plus about 5 for the box.  I leave for a trip tomorrow, so I probably won't be able to ship for 10-14 days.  I'll pay the shipping up front.

And from what I looked at, cutting doesn't really save enough to justify the effort. The long wings are what kicks it into dimensional weight.

No cutting works for me. I just didn't want it to get expensive.

So this is what I have so far:

1 - Kim
2-
3-
4-
5-
6-Allen
7-Ron

Phil, you get the next choice.

I'll pay the shipping up front and PM when I ship them with the amount.

I'll take 5 then.

The Columbus shipping is probably the same as for me, I am only an hour north of there.

I'll pm my info.

Phil

Okay, 2, 3 and 4 are available.


1 - Kim
2-
3-
4-
5- Phil
6-Allen
7-Ron

The leading edge is cut to recess the engine. If he was using a heavier engine, this is quite important. It also keeps the rotating mass directly on the leading edge. The center of glow plug should line up on the leading edge. I always liked the single boom planes, a trademark of the times I suppose. Ken

I would prefer no cutting!

2 and 3 are left.


1 - Kim
2-
3-
4- Eric
5- Phil
6-Allen
7-Ron

At this point, if any of you want a second, feel free.

   I will try and edit more pics later Well that bout covers it Thanks UPS, Eric

At least you have something to show for it....

Mine was delivered to the wrong place, rejected. Then smashed and discarded.

Hooray!!!!

I am going to cover shipping still as this isn't John's fault. I will say I am not happy about this.

Cribbs74 wrote:At least you have something to show for it....

Mine was delivered to the wrong place, rejected. Then smashed and discarded.

Hooray!!!!

I am going to cover shipping still as this isn't John's fault. I will say I am not happy about this.

No, don't pay me. I listed them as worth $75 (I'm pretty sure I can justify that). They are supposed to contact me "within 24 hours of inspection" of the item. So.... hopefully everything will be sorted out.

I'm just mad that so far I am 1 for 3 (with 2 in transit).

RON!!! I hear ya!@ what the fool would do that Eric Can fix but not what I wanted

flyjsh wrote:

Cribbs74 wrote:At least you have something to show for it....

Mine was delivered to the wrong place, rejected. Then smashed and discarded.

Hooray!!!!

I am going to cover shipping still as this isn't John's fault. I will say I am not happy about this.

No, don't pay me.  I listed them as worth $75 (I'm pretty sure I can justify that).  They are supposed to contact me "within 24 hours of inspection" of the item.  So.... hopefully everything will be sorted out.

I'm just mad that so far I am 1 for 3 (with 2 in transit).

Yo!

I got mine intact...and am feeling a bit guilty about it ! Hope you're able to get it going soon Eric !