Li'l Satan plans

**Cribbs74** Sat Oct 13, 2012 10:38 am

Does anybody have a set of plans for one?

I am deciding whether or not to get a kit from Brodak. I haven't been able to find online plans.

Thanks,

Ron

JPvelo Sat Oct 13, 2012 2:03 pm

I bought my plans from Brodak and they sent a copy of the original Goldberg plans and the updated Brodak version. I had trouble finding the correct leading and trailing edge stock so the air foil came out wonky. The one I'm flying now is from a set of two kits purchased here:
http://myworld.ebay.com/henry36912&ssPageName=STRK:MEFSX:SELLERID&_trksid=p3984.m1543.l2533
I paid about $50 with shipping for two kits, one beam and one radial mount. Good kits not great but for the price I am happy would defiantly recomend.

**Cribbs74** Sat Oct 13, 2012 2:44 pm

I took a look at what he has, but I don't see any Satans. Am I missing something?

JPvelo Sat Oct 13, 2012 2:51 pm

He may not have any right now. He cuts them by hand, I would send him a pm and see if he will cut them to order?

**RknRusty** Sat Oct 13, 2012 4:34 pm

I have the Goldberg plans, but they aren't life sized. If it'll help, I can take them to Staples and get a copy to send you. I probably have some tracings I did when I made mine. I scratch built it using whatever I could improvise, using an old cannibalized kit as a reference. I'll see what I can dig up. There aren't many parts in that plane anyway. The radial mount nacelle is the most complicated part

**Cribbs74** Sat Oct 13, 2012 7:23 pm

RknRusty wrote:I have the Goldberg plans, but they aren't life sized. If it'll help, I can take them to Staples and get a copy to send you. I probably have some tracings I did when I made mine. I scratch built it using whatever I could improvise, using an old cannibalized kit as a reference. I'll see what I can dig up. There aren't many parts in that plane anyway. The radial mount nacelle is the most complicated part

Thanks Rusty,

I was just supplied with a copy of the plans however, if you had the tracings and the wood dimensions that would be excellent!

Ron

gcb Sun Oct 14, 2012 11:51 am

cribbs74 wrote:I took a look at what he has, but I don't see any Satans. Am I missing something?

Check here...note that Brodak has modified it to accept his Beam mount engines:

http://brodak.com/control-line-kits/brodak/1-2-a-series/1-2a-lil-satan-kit.html

George

Sponsored content

Li'l Satan plans

Li'l Satan plans

Re: Li'l Satan plans

Re: Li'l Satan plans

Re: Li'l Satan plans

Re: Li'l Satan plans

Re: Li'l Satan plans

Re: Li'l Satan plans

Re: Li'l Satan plans