3mm depron plane plans

mitchg95 Wed Oct 10, 2012 8:08 pm

where can i find plans for a rc plane that uses 3mm depron?
thanks

dckrsn Wed Oct 10, 2012 8:21 pm

Here's one source, I think.
I know little about r/c and less about Depron.
Hope this helps.
Bob
http://www.parkjets.com/free-plans/
edit: looks like most of the plans call for 6mm.
Check here
http://search.yahoo.com/search?ei=utf-8&fr=slv8-grpj&p=3mm%20depron%20plans&type=

microflitedude Wed Oct 10, 2012 9:46 pm

There are ENDLESS sources for foamy plans. RCGroups is a great resource.

I am going to get back into foam scratch building when I have more time on my hands. Probably not until after xmas though.

happydad Wed Oct 10, 2012 9:55 pm

mitchg95 wrote:where can i find plans for a rc plane that uses 3mm depron?
thanks

what kind of plane are you looking for? jet, delta wing, biplane, etc.? look on ebay for "foam kits" to get an idea of what is out there. i have some plans. some plans are real cheap on ebay. sheet foam is fairly cheap, ($12 for 2 x 4foot sheet 3mm or $8 for 2 sheets 2 x 2foot 1.5mm). here are a few ideas.

cool foamy
3mm depron plane plans Coolfo10

foam jet

f16-jet

i've built both a P-51 profile and a delta wing foam plane.

edited 10-10-12 10p.m. PST - added pic of a foam plane.
3mm depron plane plans Extrad10

also downloaded plans for 2 sizes of this built-up fuselage/wing plane.

happydad Small Cox Logo

mitchg95 Thu Oct 11, 2012 9:06 am

im looking for something like a J3, or cessna

happydad Thu Oct 11, 2012 3:56 pm

mitchg95 wrote:im looking for something like a J3, or cessna

this plane is available in kit on ebay relatively cheap. also easy to make on your own.

3mm depron plane plans Foamtr10

i think i found it under "foam plane". it can be a trainer with di-hedral or a stunt plane with straight wing.
were you planning on electric or gas?
happydad Small Cox Logo

happydad Thu Oct 11, 2012 4:18 pm

Mitch: here is the link the plane i posted earlier.

http://www.ebay.com/itm/3-in-1-Trainer-Airplane-Foam-kit-Phoenix-60-Wing-/320998683108?pt=Radio_Control_Vehicles&hash=item4abd0331e4

the plane is $10 + $12 shipping or you could build your own from looking at the auction details. the material in the auction is 5mm. Plane is 60inch winspan. 37inch fuselage length. it's a trainer. look at his other auctions also. happydad Small Cox Logo

mitchg95 Thu Oct 11, 2012 4:56 pm

happydad wrote:
mitchg95 wrote:im looking for something like a J3, or cessna

this plane is available in kit on ebay relatively cheap. also easy to make on your own.

i think i found it under "foam plane". it can be a trainer with di-hedral or a stunt plane with straight wing.
were you planning on electric or gas?
happydad

im thinking something small enough for the parkzone vapor electronics

John Goddard Thu Oct 11, 2012 5:48 pm

The Kyosho Edge 540
Has the same set up, but is bank n yank and a lot
Of fun.
I imagine it profile fused would be quite a hot ship.
Very Happy

happydad Fri Oct 12, 2012 1:29 am

mitchg95 wrote:
happydad wrote:
mitchg95 wrote:im looking for something like a J3, or cessna

this plane is available in kit on ebay relatively cheap. also easy to make on your own.

i think i found it under "foam plane". it can be a trainer with di-hedral or a stunt plane with straight wing.
were you planning on electric or gas?
happydad

im thinking something small enough for the parkzone vapor electronics

here is a video - how to build a $10 foam plane

https://www.youtube.com/watch?v=jv3D30RGT-g&feature=related

build any size you want. happydad Small Cox Logo

Sponsored content

3mm depron plane plans

3mm depron plane plans

Re: 3mm depron plane plans

Re: 3mm depron plane plans

re: foamy plane

Re: 3mm depron plane plans

re: cub foam plane

re: foam plane

Re: 3mm depron plane plans

Re: 3mm depron plane plans

re: video - how to build a $10 foam plane

Re: 3mm depron plane plans