Re: Tach Race 2015 Final Wrap-Up

TDbandit Fri Jan 09, 2015 8:31 pm

Kim wrote:
TDbandit wrote:Hi man, I'm looking at sending my engine in the next couple of days hopefully, anyway I need your address so I can send this little monster to ya. Also I'm including some shims since I broke it in on as well as done all my test n tuning on 25%. If you have any questions let me know. (Bandit)

Here your go:

Engines can be sent to either of these two addresses:

Kim Stricker
300 C.R. 326
Jackson, Missouri 63755

Kim Stricker
P.O. Box 6
Jackson, Missouri 63755

Cell: 573-576-5734

Thanks man, as soon as I complete this final "experiment" I'll send it on it's way! Smile

(Bandit)

**RknRusty** Fri Jan 09, 2015 10:33 pm

Kim wrote:Appreciate it...I also hope I'm not sick. Should be Ok.

If you are sick, we'll just postpone it.
Rusty

GWILLIEFOX Tue Jan 13, 2015 12:34 pm

Hi Kim, I plan to send in a Space Hopper; I'll be running it this afternoon. I have it mounted on a ratty old Carl Goldberg wooden stand. Can I send you just the engine?
Bill

Oldenginerod Tue Jan 13, 2015 3:07 pm

What class would a Space Hopper enter? Unlimited?

Kim Tue Jan 13, 2015 4:40 pm

GWILLIEFOX wrote:Hi Kim, I plan to send in a Space Hopper; I'll be running it this afternoon. I have it mounted on a ratty old Carl Goldberg wooden stand. Can I send you just the engine?
Bill

Hey Bill,

Yes, I have test stands for all the engines. Your Space Hopper will be qualified for entry in the Unlimited Class!

Kim Stricker
300 C.R. 326
Jackson, Missouri 63755

Cell: 573-576-5734

Kim Tue Jan 13, 2015 4:59 pm

Oldenginerod wrote:What class would a Space Hopper enter? Unlimited?

Hey Rod,

Yeah, we've had them in Unlimited before.

Kim Tue Jan 13, 2015 5:20 pm

Also, just got a call from Ryan, a good fellow in charge of shipping the Cox Super Fuel for Tach Race 2015. The fuel should arrive later this week, and I'll announce once it's safe on the shelf.

GWILLIEFOX Tue Jan 13, 2015 6:19 pm

I got my Space Hopper at a local hobby shop flea market. It was wrapped up in a paper towel and thrown into a "Your Choice" $2 bin. I saw the venture sticking out and bought it. It is pretty nice cosmetically. Someone hogged the lower part of the cylinder and the thrust washer was deeply worn from starter use. There was enough slop the crankpin would rub the rear cover so I installed a brass washer at the fron of the case.

I fired it up this afternoon on Sig Fuel, 25% I think and used a 5.5 x 4 gray wide blade Cox prop. 16,000 on the stock head, 16,500 with Galbreath head and Nelson plug (2 washers).

Should I send the engine with the Cox and Galbreath head? Should I send extra washers?

Bill

Kim Tue Jan 13, 2015 6:25 pm

GWILLIEFOX wrote:I got my Space Hopper at a local hobby shop flea market. It was wrapped up in a paper towel and thrown into a "Your Choice" $2 bin. I saw the venture sticking out and bought it. It is pretty nice cosmetically. Someone hogged the lower part of the cylinder and the thrust washer was deeply worn from starter use. There was enough slop the crankpin would rub the rear cover so I installed a brass washer at the fron of the case.

I fired it up this afternoon on Sig Fuel, 25% I think and used a 5.5 x 4 gray wide blade Cox prop. 16,000 on the stock head, 16,500 with Galbreath head and Nelson plug (2 washers).

Should I send the engine with the Cox and Galbreath head? Should I send extra washers?

Bill

The engine should arrive with your best combination of heads and gaskets. Other than insuring all parts are tight and ready to go, with a brief run to get it up to temp, the intent is to run them as sent.

P.S. What a deal for 2 bucks !!!

TDbandit Tue Jan 13, 2015 6:26 pm

Cool! what content is it 35%? also waiting on a crankshaft so it's gonna be a bit longer than anticipated till I send it (don't quite trust a stock crank with the RPM it's turning) (Bandit)

Kim Tue Jan 13, 2015 6:34 pm

TDbandit wrote:Cool! what content is it 35%? also waiting on a crankshaft so it's gonna be a bit longer than anticipated till I send it (don't quite trust a stock crank with the RPM it's turning) (Bandit)

Yep...35% across the board but for The Babe Bee which will be 20%

TDbandit Tue Jan 13, 2015 6:55 pm

Ok I'll pop an extra shim in it when I ship it hopefully it will be enough. (Bandit)

Kim Wed Jan 14, 2015 10:32 am

Got the shop above freezing a little on the early side the morning, and used my caffeine high to get some photos taken.

These are the first engines to make it to the Skunk Works for Tach Race 2015. They belong to Daryll---"P-40 Warhawk".

tach race 2015 - Tach Race 2015 Final Wrap-Up - Page 6 1_110

tach race 2015 - Tach Race 2015 Final Wrap-Up - Page 6 1_110

tach race 2015 - Tach Race 2015 Final Wrap-Up - Page 6 2_210

tach race 2015 - Tach Race 2015 Final Wrap-Up - Page 6 3_111

tach race 2015 - Tach Race 2015 Final Wrap-Up - Page 6 4_110

Beautiful Engines, Daryll !!!

P-40 Warhawk Wed Jan 14, 2015 9:19 pm

Thanks Kim,I only hope they can keep up with the competition.

**Cribbs74** Wed Jan 14, 2015 9:28 pm

They certainly have a presence!

Good luck!

roddie Wed Jan 14, 2015 11:13 pm

Very nice looking engines Daryll.. and great photos of them Kim!!! Small Cox Logo

cryo-one Thu Jan 15, 2015 12:37 pm

Kim, I sent my entries last Friday via USPS Priority. For the last 3 days they have been bouncing around
KS. & MO. trying to find you. Have a look at the tracking -- 9114999944314240120525
Very Interesting !

Wayne

GWILLIEFOX Thu Jan 15, 2015 5:56 pm

My 2 buck Space Hopper is in the mail.

Oldenginerod Thu Jan 15, 2015 7:51 pm

GWILLIEFOX wrote:2 buck Space Hopper...

Now I'm envious Sad

**RknRusty** Thu Jan 15, 2015 8:34 pm

TDbandit wrote:Cool! what content is it 35%? also waiting on a crankshaft so it's gonna be a bit longer than anticipated till I send it (don't quite trust a stock crank with the RPM it's turning) (Bandit)

I bet a stock Babe Bee crank should be safe up to 24K for a good many runs before it surrenders. In my experience the stockers turn faster that the diesel cranks.

I guess I better dust off an engine and get it in the mail. Probably my Reed Speed engine. And maybe a Black Widow I rebuilt a couple of years ago.
Rusty

**Cribbs74** Thu Jan 15, 2015 8:49 pm

I have used Bee cranks the past 2yrs. I posed the question to Paul Gibeault and was told it is doable.

Ron

TDbandit Thu Jan 15, 2015 9:06 pm

RknRusty wrote:
TDbandit wrote:Cool! what content is it 35%? also waiting on a crankshaft so it's gonna be a bit longer than anticipated till I send it (don't quite trust a stock crank with the RPM it's turning) (Bandit)

I bet a stock Babe Bee crank should be safe up to 24K for a good many runs before it surrenders. In my experience the stockers turn faster that the diesel cranks.

I guess I better dust off an engine and get it in the mail. Probably my Reed Speed engine. And maybe a Black Widow I rebuilt a couple of years ago.
Rusty

Cool nice to hear since I decided to just leave the stocker in there and let it rip. It's gonna be a while before the new crank gets here and I'm running out of time. Now if it would just quit raining just for a day I can get one final test n tune session in before I box it up and send it. "Sits back and watches the rain come down" (Bandit)

Mark Boesen Thu Jan 15, 2015 11:30 pm

fyi, i plan on mailing engines monday, might actually test run them this time...no, prolly won't. I'm sending a mint mid-sixties Babe, looks new, glowhead looks new (i did pull glowhead and checked reed, thats the preflight) should be fun to see what it turns!
tach race 2015 - Tach Race 2015 Final Wrap-Up - Page 6 10936511

tach race 2015 - Tach Race 2015 Final Wrap-Up - Page 6 10936511

tach race 2015 - Tach Race 2015 Final Wrap-Up - Page 6 10937810

Kim Fri Jan 16, 2015 3:18 am

cryo-one wrote:Kim, I sent my entries last Friday via USPS Priority. For the last 3 days they have been bouncing around
KS. & MO. trying to find you. Have a look at the tracking -- 9114999944314240120525
Very Interesting !

Wayne

Well Crap, I wonder what that's about?! The zip code alone ought to at least get it to Jackson !

getback Fri Jan 16, 2015 5:52 am

I will bee sending my engines first of the week had been waiting on some head gaskets that just got here /// I shipped some stuff to Canada and the had a lay over at that same place for international shipping exchange I think ? but they did move on after a few days . Eric Cold

Sponsored content